FINCSTP—Increment Stack-Top PointerDescriptionAdds one to the TOP field of the FPU status word (increments the top-of-stack pointer). If the TOP field contains a 7, it is set to 0. The effect of this instruction is to rotate the stack by one position. The contents of the FPU data registers and tag register are not affected. This operation is not equivalent to popping the stack, because the tag for the previous top-of-stack register is not marked empty.This instruction’s operation is the same in non-64-bit modes and 64-bit mode.OperationIF TOP = 7THEN TOP := 0;ELSE TOP := TOP + 1;FI;FPU Flags AffectedThe C1 flag is set to 0. The C0, C2, and C3 flags are undefined.Floating-Point ExceptionsNoneProtected Mode Exceptions#NMCR0.EM[bit 2] or CR0.TS[bit 3] = 1.#MF If there is a pending x87 FPU exception.#UD If the LOCK prefix is used.Real-Address Mode ExceptionsSame exceptions as in protected mode.Virtual-8086 Mode ExceptionsSame exceptions as in protected mode.Compatibility Mode ExceptionsSame exceptions as in protected mode.64-Bit Mode ExceptionsSame exceptions as in protected mode.OpcodeInstruction64-Bit ModeCompat/Leg ModeDescriptionD9 F7FINCSTPValidValidIncrement the TOP field in the FPU status register.
This UNOFFICIAL reference was generated from the official Intel® 64 and IA-32 Architectures Software Developer’s Manual by a dumb script. There is no guarantee that some parts aren't mangled or broken and is distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.